Function/Subroutine Documentation

◆ prenl3()

subroutine prenl3 ( )

Brief:: PREPARES THE COMPUTATION FOR THE NON-LINEAR INTERACTION SOURCE TERM BETWEEN QUADRUPLETS USING THE GQM METHOD ("GAUSSIAN QUADRATURE METHOD") PROPOSED BY LAVRENOV (2001)

E. GAGNAIRE-RENOU 04/2011 V6P1 CREATED

G.MATTAROLO (EDF - LNHE) 24/06/2011 V6P1 Translation of French names of the variables in argument

Parameters

[in]	DIMBUF	Variable for spectrum interpolation
[out]	ELIM	Fraction of eliminated configurations
[out]	F_COEF	Work table for spectrum interpolation
[out]	F_POIN	Work table for spectrum interpolation
[out]	F_PROJ	Work table for spectrum interpolation
[in]	FREQ	Discretized frequencies
[out]	IDCONF	Work table
[out]	IQ_OM1	Number of integration point on omega1
[out]	K_IF1	Work table
[out]	K_IF2	Work table
[out]	K_IF3	Work table
[out]	K_1M	Work table
[out]	K_1M2M	Work table
[out]	K_1M2P	Work table
[out]	K_1M3M	Work table
[out]	K_1M3P	Work table
[out]	K_1P	Work table
[out]	K_1P2M	Work table
[out]	K_1P2P	Work table
[out]	K_1P3M	Work table
[out]	K_1P3P	Work table
[in]	LBUF	Variable for spectrum interpolation
[out]	NCONF	Number of retained configurations
[in]	NCONFM	Maximum number of configurations
[in]	NF	Number of frequencies
[in]	NF1	Number of integration point on omega1
[in]	NQ_OM2	Number of integration point on omega2
[in]	NQ_TE1	Setting for integration on theta1
[in]	NT	Number of directions
[in]	NT1	Number of integration point on theta1
[in]	RAISF	Frequential ratio
[in]	SEUIL1	Threshold1 for configurations elimination
[in]	SEUIL2	Threshold2 for configurations elimination
[out]	T_POIN	Work table for spectrum interpolation
[in]	TAILF	Spectrum queue factor
[out]	TB_FAC	Work table
[out]	TB_SCA	Scale coefficient
[out]	TB_TMP	Work table
[out]	TB_TPM	Work table
[out]	TB_V14	Work table for f1
[out]	TB_V24	Work table
[out]	TB_V34	Work table

Definition at line 4 of file prenl3.f.

Here is the call graph for this function:

Here is the caller graph for this function: