The TELEMAC-MASCARET system  trunk
Functions/Subroutines
bedload_effpnt_gaia.f File Reference

Go to the source code of this file.

Functions/Subroutines

subroutine bedload_effpnt_gaia (MASKEL, LIQBOR, S, ZF, NPOIN, NPTFR, IELMT, KENT, BETA, PI, MSK, MESH, DZFDX, DZFDY, CTETA, STETA, COEF, CALFA, SALFA, SLOPEFF, PHISED, DEVIA, BETA2, TOB, XMVS, XMVE, DCLA, GRAV, UNSV2D)
 

Function/Subroutine Documentation

◆ bedload_effpnt_gaia()

subroutine bedload_effpnt_gaia ( type(bief_obj), intent(in)  MASKEL,
type(bief_obj), intent(in)  LIQBOR,
type(bief_obj), intent(in)  S,
type(bief_obj), intent(in)  ZF,
integer, intent(in)  NPOIN,
integer, intent(in)  NPTFR,
integer, intent(in)  IELMT,
integer, intent(in)  KENT,
double precision, intent(in)  BETA,
double precision, intent(in)  PI,
logical, intent(in)  MSK,
type(bief_mesh), intent(inout)  MESH,
type(bief_obj), intent(inout)  DZFDX,
type(bief_obj), intent(inout)  DZFDY,
type(bief_obj), intent(inout)  CTETA,
type(bief_obj), intent(inout)  STETA,
type(bief_obj), intent(inout)  COEF,
type(bief_obj), intent(inout)  CALFA,
type(bief_obj), intent(inout)  SALFA,
integer, intent(in)  SLOPEFF,
double precision, intent(in)  PHISED,
integer, intent(in)  DEVIA,
double precision, intent(in)  BETA2,
type(bief_obj), intent(in)  TOB,
double precision, intent(in)  XMVS,
double precision, intent(in)  XMVE,
double precision, intent(in)  DCLA,
double precision, intent(in)  GRAV,
type(bief_obj), intent(in)  UNSV2D 
)
Parameters
[in]maskelBETA Coefficient for sloping bed effect (koch and flokstra)
[in]BETA2Coefficient for the deviation (talmon et al.)
[in,out]CALFACosinus of the angle between transport rate and x-axis
[in,out]COEFCorrection coefficient for the intensity of bedload transport
[in,out]CTETACosinus of the angle between mean flow and x-axis
[in]DEVIASlope effect formula for deviation
[in]DCLASediment grain diameter
[in,out]DZFDXBottom slope in the x-direction
[in,out]DZFDYBottom slope in the y-direction
[in]GRAVAcceleration of gravity
[in]IELMTNumber of elements
[in]KENTConvention for liquid input with prescribed value
[in]LIQBORType of boundary condition for qs
[in]MASKELMasking of elements
[in,out]MESHMesh structure
[in]MSKIf yes, there is masked elements
[in]NPOINNumber of points
[in]NPTFRNumber of boundary points
[in]PHISEDAngle of repose of the sediment
[in]PIPi
[in]SVoid structure
[in,out]SALFASinus of the angle between transport rate and x-axis
[in]SLOPEFFFormula for slope effect
[in,out]STETACosinus of the angle between mean flow and y-axis
[in,out]TOBBed shear stress (total friction)
[in]UNSV2DInverse of integrals of test functions
[in]XMVEFluid density
[in]XMVSWater density
[in]ZFElevation of bottom
[in]liqborBETA Coefficient for sloping bed effect (koch and flokstra)
[in]BETA2Coefficient for the deviation (talmon et al.)
[in,out]CALFACosinus of the angle between transport rate and x-axis
[in,out]COEFCorrection coefficient for the intensity of bedload transport
[in,out]CTETACosinus of the angle between mean flow and x-axis
[in]DEVIASlope effect formula for deviation
[in]DCLASediment grain diameter
[in,out]DZFDXBottom slope in the x-direction
[in,out]DZFDYBottom slope in the y-direction
[in]GRAVAcceleration of gravity
[in]IELMTNumber of elements
[in]KENTConvention for liquid input with prescribed value
[in]LIQBORType of boundary condition for qs
[in]MASKELMasking of elements
[in,out]MESHMesh structure
[in]MSKIf yes, there is masked elements
[in]NPOINNumber of points
[in]NPTFRNumber of boundary points
[in]PHISEDAngle of repose of the sediment
[in]PIPi
[in]SVoid structure
[in,out]SALFASinus of the angle between transport rate and x-axis
[in]SLOPEFFFormula for slope effect
[in,out]STETACosinus of the angle between mean flow and y-axis
[in,out]TOBBed shear stress (total friction)
[in]UNSV2DInverse of integrals of test functions
[in]XMVEFluid density
[in]XMVSWater density
[in]ZFElevation of bottom
[in]sBETA Coefficient for sloping bed effect (koch and flokstra)
[in]BETA2Coefficient for the deviation (talmon et al.)
[in,out]CALFACosinus of the angle between transport rate and x-axis
[in,out]COEFCorrection coefficient for the intensity of bedload transport
[in,out]CTETACosinus of the angle between mean flow and x-axis
[in]DEVIASlope effect formula for deviation
[in]DCLASediment grain diameter
[in,out]DZFDXBottom slope in the x-direction
[in,out]DZFDYBottom slope in the y-direction
[in]GRAVAcceleration of gravity
[in]IELMTNumber of elements
[in]KENTConvention for liquid input with prescribed value
[in]LIQBORType of boundary condition for qs
[in]MASKELMasking of elements
[in,out]MESHMesh structure
[in]MSKIf yes, there is masked elements
[in]NPOINNumber of points
[in]NPTFRNumber of boundary points
[in]PHISEDAngle of repose of the sediment
[in]PIPi
[in]SVoid structure
[in,out]SALFASinus of the angle between transport rate and x-axis
[in]SLOPEFFFormula for slope effect
[in,out]STETACosinus of the angle between mean flow and y-axis
[in,out]TOBBed shear stress (total friction)
[in]UNSV2DInverse of integrals of test functions
[in]XMVEFluid density
[in]XMVSWater density
[in]ZFElevation of bottom
[in]unsv2dBETA Coefficient for sloping bed effect (koch and flokstra)
[in]BETA2Coefficient for the deviation (talmon et al.)
[in,out]CALFACosinus of the angle between transport rate and x-axis
[in,out]COEFCorrection coefficient for the intensity of bedload transport
[in,out]CTETACosinus of the angle between mean flow and x-axis
[in]DEVIASlope effect formula for deviation
[in]DCLASediment grain diameter
[in,out]DZFDXBottom slope in the x-direction
[in,out]DZFDYBottom slope in the y-direction
[in]GRAVAcceleration of gravity
[in]IELMTNumber of elements
[in]KENTConvention for liquid input with prescribed value
[in]LIQBORType of boundary condition for qs
[in]MASKELMasking of elements
[in,out]MESHMesh structure
[in]MSKIf yes, there is masked elements
[in]NPOINNumber of points
[in]NPTFRNumber of boundary points
[in]PHISEDAngle of repose of the sediment
[in]PIPi
[in]SVoid structure
[in,out]SALFASinus of the angle between transport rate and x-axis
[in]SLOPEFFFormula for slope effect
[in,out]STETACosinus of the angle between mean flow and y-axis
[in,out]TOBBed shear stress (total friction)
[in]UNSV2DInverse of integrals of test functions
[in]XMVEFluid density
[in]XMVSWater density
[in]ZFElevation of bottom

Definition at line 10 of file bedload_effpnt_gaia.f.

+ Here is the call graph for this function:
+ Here is the caller graph for this function: