Go to the source code of this file.
Functions/Subroutines | |
| subroutine | bedload_effpnt (MASKEL, LIQBOR, S, ZF, NPOIN, NPTFR, IELMT, KENT, BETA, PI, MSK, MESH, DZFDX, DZFDY, CTETA, STETA, COEF, CALFA, SALFA, SLOPEFF, PHISED, DEVIA, BETA2, TOB, XMVS, XMVE, DM, GRAV, UNSV2D) |
Function/Subroutine Documentation
◆ bedload_effpnt()
| subroutine bedload_effpnt | ( | type(bief_obj), intent(in) | MASKEL, |
| type(bief_obj), intent(in) | LIQBOR, | ||
| type(bief_obj), intent(in) | S, | ||
| type(bief_obj), intent(in) | ZF, | ||
| integer, intent(in) | NPOIN, | ||
| integer, intent(in) | NPTFR, | ||
| integer, intent(in) | IELMT, | ||
| integer, intent(in) | KENT, | ||
| double precision, intent(in) | BETA, | ||
| double precision, intent(in) | PI, | ||
| logical, intent(in) | MSK, | ||
| type(bief_mesh), intent(inout) | MESH, | ||
| type(bief_obj), intent(inout) | DZFDX, | ||
| type(bief_obj), intent(inout) | DZFDY, | ||
| type(bief_obj), intent(inout) | CTETA, | ||
| type(bief_obj), intent(inout) | STETA, | ||
| type(bief_obj), intent(inout) | COEF, | ||
| type(bief_obj), intent(inout) | CALFA, | ||
| type(bief_obj), intent(inout) | SALFA, | ||
| integer, intent(in) | SLOPEFF, | ||
| double precision, intent(in) | PHISED, | ||
| integer, intent(in) | DEVIA, | ||
| double precision, intent(in) | BETA2, | ||
| type(bief_obj), intent(in) | TOB, | ||
| double precision, intent(in) | XMVS, | ||
| double precision, intent(in) | XMVE, | ||
| double precision, intent(in) | DM, | ||
| double precision, intent(in) | GRAV, | ||
| type(bief_obj), intent(in) | UNSV2D | ||
| ) |
- Parameters
-
[in] maskel BETA Coefficient for sloping bed effect ( koch and flokstra) [in] BETA2 Coefficient for the deviation (talmon et al.) [in,out] CALFA Cosinus of the angle between transport rate and x-axis [in,out] COEF Correction coefficient for the intensity of bedload transport [in,out] CTETA Cosinus of the angle between mean flow and x-axis [in] DEVIA Slope effect formula for deviation [in] DM Sediment grain diameter [in,out] DZFDX Bottom slope in the x-direction [in,out] DZFDY Bottom slope in the y-direction [in] GRAV Acceleration of gravity [in] IELMT Number of elements [in] KENT Convention for liquid input with prescribed value [in] LIQBOR Type of boundary condition for qs [in] MASKEL Masking of elements [in,out] MESH Mesh structure [in] MSK If yes, there is masked elements [in] NPOIN Number of points [in] NPTFR Number of boundary points [in] PHISED Angle of repose of the sediment [in] PI Pi [in] S Void structure [in,out] SALFA Sinus of the angle between transport rate and x-axis [in] SLOPEFF Logical, sloping bed effect or not [in,out] STETA Cosinus of the angle between mean flow and y-axis [in,out] TOB Bed shear stress (total friction) [in] UNSV2D Inverse of integrals of test functions [in] XMVE Fluid density [in] XMVS Water density [in] ZF Elevation of bottom [in] liqbor BETA Coefficient for sloping bed effect ( koch and flokstra) [in] BETA2 Coefficient for the deviation (talmon et al.) [in,out] CALFA Cosinus of the angle between transport rate and x-axis [in,out] COEF Correction coefficient for the intensity of bedload transport [in,out] CTETA Cosinus of the angle between mean flow and x-axis [in] DEVIA Slope effect formula for deviation [in] DM Sediment grain diameter [in,out] DZFDX Bottom slope in the x-direction [in,out] DZFDY Bottom slope in the y-direction [in] GRAV Acceleration of gravity [in] IELMT Number of elements [in] KENT Convention for liquid input with prescribed value [in] LIQBOR Type of boundary condition for qs [in] MASKEL Masking of elements [in,out] MESH Mesh structure [in] MSK If yes, there is masked elements [in] NPOIN Number of points [in] NPTFR Number of boundary points [in] PHISED Angle of repose of the sediment [in] PI Pi [in] S Void structure [in,out] SALFA Sinus of the angle between transport rate and x-axis [in] SLOPEFF Logical, sloping bed effect or not [in,out] STETA Cosinus of the angle between mean flow and y-axis [in,out] TOB Bed shear stress (total friction) [in] UNSV2D Inverse of integrals of test functions [in] XMVE Fluid density [in] XMVS Water density [in] ZF Elevation of bottom [in] s BETA Coefficient for sloping bed effect ( koch and flokstra) [in] BETA2 Coefficient for the deviation (talmon et al.) [in,out] CALFA Cosinus of the angle between transport rate and x-axis [in,out] COEF Correction coefficient for the intensity of bedload transport [in,out] CTETA Cosinus of the angle between mean flow and x-axis [in] DEVIA Slope effect formula for deviation [in] DM Sediment grain diameter [in,out] DZFDX Bottom slope in the x-direction [in,out] DZFDY Bottom slope in the y-direction [in] GRAV Acceleration of gravity [in] IELMT Number of elements [in] KENT Convention for liquid input with prescribed value [in] LIQBOR Type of boundary condition for qs [in] MASKEL Masking of elements [in,out] MESH Mesh structure [in] MSK If yes, there is masked elements [in] NPOIN Number of points [in] NPTFR Number of boundary points [in] PHISED Angle of repose of the sediment [in] PI Pi [in] S Void structure [in,out] SALFA Sinus of the angle between transport rate and x-axis [in] SLOPEFF Logical, sloping bed effect or not [in,out] STETA Cosinus of the angle between mean flow and y-axis [in,out] TOB Bed shear stress (total friction) [in] UNSV2D Inverse of integrals of test functions [in] XMVE Fluid density [in] XMVS Water density [in] ZF Elevation of bottom [in] unsv2d BETA Coefficient for sloping bed effect ( koch and flokstra) [in] BETA2 Coefficient for the deviation (talmon et al.) [in,out] CALFA Cosinus of the angle between transport rate and x-axis [in,out] COEF Correction coefficient for the intensity of bedload transport [in,out] CTETA Cosinus of the angle between mean flow and x-axis [in] DEVIA Slope effect formula for deviation [in] DM Sediment grain diameter [in,out] DZFDX Bottom slope in the x-direction [in,out] DZFDY Bottom slope in the y-direction [in] GRAV Acceleration of gravity [in] IELMT Number of elements [in] KENT Convention for liquid input with prescribed value [in] LIQBOR Type of boundary condition for qs [in] MASKEL Masking of elements [in,out] MESH Mesh structure [in] MSK If yes, there is masked elements [in] NPOIN Number of points [in] NPTFR Number of boundary points [in] PHISED Angle of repose of the sediment [in] PI Pi [in] S Void structure [in,out] SALFA Sinus of the angle between transport rate and x-axis [in] SLOPEFF Logical, sloping bed effect or not [in,out] STETA Cosinus of the angle between mean flow and y-axis [in,out] TOB Bed shear stress (total friction) [in] UNSV2D Inverse of integrals of test functions [in] XMVE Fluid density [in] XMVS Water density [in] ZF Elevation of bottom
Definition at line 10 of file bedload_effpnt.f.
Here is the call graph for this function: Here is the caller graph for this function: